TRIKOLITE G 30

Waterpoof elastic mortar, passable.


Mortar based in TRIKOLITE, aditives, cement, selected sands, quartz flour and acrylic resins as second component. The adition of the 3% of TRICOLITE gives to the elastic mortar special qualities, as high elasticity and resistance to stagnant waters and the soluble inorganic salts that containts. Also contributes giving a much higher adherence coefficient to all materials involved. inorgánicas que contienen. The second component confers to the final product waterproof properties much more higher than any other in the construction market.

Uses

In swimming pools for the covering or tiling of the inner vessel. In terraces has a passable finishing. Waterproof for showers, baths and all type of places with damp. Protection against damp in basements, cellars and walls near groundwaters.
Can be applied in damp supports.

Surface preparation

The support must be clean of any paint, grease, oils, dust, etc. Also it must be steady and hard.
To guarantee a perfect fix, surfaces must me damp but not wet.
Just after the product it has been applied it must be protected from draughts and from direct sunlight.
Do not apply the product with temperatures under 5ºC.

Instructions for use

Depending on the type of waterproof desired, it should be used a brush, a painting roller, paintbrush or a trowel.
For its application with brush, mix the part A of the TRIKOLITE G 30 with the part B till you get an homogenous compact paste without lumps.
Do not apply more than 2 mm, otherwise the drying will take too long.

Consumption

Consum depends on the conditions of the support.
Average output: 1,4kg/m2 for 1mm of thickness.
Drying time: 5h (1mm at 20ºC and 70% HR).

Colours

Grey and red.

Packing and storing

TRIKOLITE G 30 is packed in hermetic barrels, according to EC packing and storing directives for chemical products.

Hygiene and safety

See the product label.

Specification

Part A
Appearance: dust of the selected color
Apparent density at 20ºC: 0,99 ±0.05 g/mL

Part B
Appearance:White milky liquid
Dry extract at 120 ºC:57 ± 2 %
Viscosity (A3, V20, 25ºC):600 ± 200 cP
pH (DIN 53785):8 ± 1
Minimum temperature for formation of the film:5°C

Mixture A+B: 40/60 in weight
Consistence:50% at 20°C and 70% HR
Waterproof of water:15 days without contact of water.
Fungus migration: One month
Dry touch (1000 µm, Vidrio, 20ºC):2,5 ± 0,5 hours
Complete dry (1000 mm, vidrio, 20ºC):
5 ± 1 hours
Registred in "Registro general sanitario de alimentos para la fabricación y/o elaboración y/o transformación de pinturas barnices y revestimientos Nº registro sanitario 39.03631/GE"

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.