PROTECTOR F Nº1 -Nº2

Revitalizer waterproof, water-repellent, perspirable and colourless.


The most important elements which are responsible of degradation in the building materials are water and atmospheric pollution. As a remedy against them we have developed a product with a high molecular weight which gives a great repellent power. It is based in hidroxilled resins which solved in special solvents, have a great soak power (2/3 mm.) and this allows the treated surfaces remain unalterable in rain or atmospheric pollution and also it gives a great protection against saline efflorescence.
PROTECTOR F Nº1 achieves a double effect, water-repellent, preserving the porosity of the material in order to let it breathe and blocking the simultaneous entrance of the water, therefore slips over the surface without leaving traces. Also gives to materials a light tonality colour.

Uses

The product is suitable to waterproof of all the construction materials if they do not have fissures or cracks: It is suitable to use with materials such as concrete, mortar, natural or artificial stone, manufactured materials, bricks, blocks, fibrocement, roof tiles, etc. PROTECTOR F Nº1– Nº2 is very useful in all kind of buildings and construction works where there are moisture problems or to prevent them, and to avoid efflorescence, small premature crumbling, chemical attacks, etc. It avoids the water soak and it gives a repellent effect against dust and it cleans itself. The product protects against the erosion and throws off water without obstructing the natural material exudation. It resists chemical aggressions. PROTECTOR F Nº1- Nº2 does not create a film, like other products, and it acts by capillarity or impregnation, so it does not show alterations on the treated surface. It increases the performance of acrylic or plastic paints.

Surface preparation

The surface must be dry and without dust. The efflorescence must be removed before the application of PROTECTOR F Nº1- Nº2.

Instructions for use

PROTECTOR F Nº1 must be applied pure, as it is supplied, with brush, paint roller, paintbrush, airless or similar, etc. The application must be done from bottom to top, to avoid badly impregnation of parts. When the surface is very porous, apply PROTECTOR F Nº1, it can admit a second coat.

Consumption

Depending on the absorbency and the roughness of the surface and the way to apply the product, 1 litre PROTECTOR F Nº1 will cover from 3 to 5 m². To find the exact consumption it is useful to do a previous test on the surface to treat.

Absorption tests on different supports:

Application on bricks without a coat:
4-6m²/litre.
Application on concrete, mortar, natural or artificial stone: 3-5m²/litre.
Application on fibrocement: 5-7m²/litre.


Colours

Colourless

Packing and storing

PROTECTOR F is presented in two tonalities, Nº1 and Nº2. Consult our technical department.
PROTECTOR F is packed in hermetic barrels; according to EC packing and storing directives for chemical products.

Hygiene and safety

Keep away from children’s reach.

Specification

Aspect: Colourless transparent liquid.
Viscosity (Copa Ford Nº4, 20ºC): 10”-11”
Dry extract (auto, 120ºC, sand): PROTECTOR FNº1: 3,5±0,5
PROTECTOR FNº2: 6,0±0,5
Density at 20ºC: Protector F Nº1: 0, 80 ±0,02g/cm3
Protector F Nº2: 0, 78 ±0,02g/cm3
Water-repellent power: VERY HIGH

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.