Products

It is a prepared mortar for immediate use which mixed only with water is used as a controlled expansion mortar. Ideal for plaster fillings and anchorages in places of difficult access and those which, moreover, need high initial and final resistance, such as machinery basements, concrete and iron pillars anchorages, etc. ANCLADUR also acts as an excellent concrete fissure repairer. It has high mechanical resistance at short and long term.
It does not show retraction (it expands very slightly), so it avoids cracks and fissures. The completely hardened product fills 100% of the plaster filling.
ANCLADUR has optimal adherence to metallic and concrete surfaces. It also has an extraordinary self-levelling fluidity even without much water which let the mortar fill perfectly all the anchorage points, even those of difficult access. It passivates and protects metallic frameworks or surfaces and makes them long lasting. It is exempt of chlorides and metallic aggregates which could favour corrosion. Once it has been hardened it is water-repellent and waterproof to greases and oils.

· Uses
· Surface preparation
· Instructions for use
· Consumption
· Colours
· Packing and storing
· Hygiene and safety
· Specification

Last update: 22/07/2009

Uses

I can be used in plaster fillings and anchorages in concrete floors for machinery subjected to hard mechanical conditions; it is also useful in metallic pillars sealing and fillings, bridges basements, rails and for special repairing in horizontal concrete surfaces, injections to reinforce frameworks, structures, etc.

Surface preparation

In old surfaces eliminate previously the remainders of bad stuck particles and other impurities such as oils, greases, etc. Apply the product with temperatures between +5º and +35ºC. The support must be wet but without puddles.

Instructions for use

ANCLADUR is supplied ready to use. Add the necessary water depending on the wanted consistence and mix it preferably with low revolutions mechanical mixer. It is important to avoid water excess because it would reduce initial and final resistance. The quantity of water recommended is 3 -5 litres per 25 Kg. Protect the mixture from draughts and excessive heat.

Consumption

With a normal relation ANCLADUR-water of 25/4 you can obtain 12 litres of mixture per bag of 25Kg.

Colours

Grey.

Packing and storing

ANCLADUR is packed in hermetic barrels; according to EC packing and storing directives for chemical products. Professional use.

Hygiene and safety

See product label.

Specification

Aspect:Granulated grey powder.
Apparent density at 20ºC:1.15 gr. /cm³
Consistence (UNE 83.811-92):200% (3.6 lt. water/25 Kg. of mortar)
Resistance to compression (UNE 83.821-92) [3.6 water liters/25 Kg. mortar]:
1 day 310.4 Kg. /cm²
3 days 500.6 Kg. /cm²
7 days 590.5 Kg. /cm²
28 days 670.5 Kg. /cm²

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.