MORFUN

Waterproof, fungicide, bactericide, joints sealant mortar


Formulated specifically to seal joints in pavements, floors and wall tiles, MORFUN’s most important particularity is its capacity to maintain the white colour with the passage of time. To achieve this property, it has been additivated with powerful bactericides and fungicides which impede germs, bacteria and fungus formation. The addition of water-repellents and mass waterproofing agents avoid the mortar to absorb dirty water as this is the reason for the ageing and the bad aspect of sealing mortars. The addition of powerful agents to maintain its white colour makes MORFUN the most white of all the sealing mortars in the market.

Uses

To seal tiles and ceramics with a width not wider than 10 mm., floors, etc. in kitchens, bathrooms, swimming-pools, ...
The range of application of this product: hotel business, alimentary industries, schools and colleges, communities, hospitals, etc.

Surface preparation

The joints to fill will be clean. In old surfaces, eliminate previously the remainders of bad stuck particles and other impurities. Moreover, it has to be exempt of greases, oils, etc. If the application must be done at high temperatures it is necessary to wet the joint through a small watering inside it. Do not apply with temperatures below 5ºC.

Instructions for use

Mix MORFUN with the suggested water, 6 litres per 25 Kg. of the powder, to obtain a MORTAR OF PLASTIC CONSISTENCE, BUT NOT OF A WHITEWASH ONE. Fill the joints with a rubber trowel, pressing over the joints to obtain a complete filling. Do not make changes to the sealed joints until 45 minutes after the application. First carry out a clean after 2 hours of its application. To carry out the definitive clean, wait 24 hours. Depending on the room temperature, the cleaning can be made before or after the recommended time.

Consumption

Pieces (MM) joint5MM Joint 10MM
100x200x10 1kg/m2 2kg/m2
200x200x10 0,7kg/m2 1,4kg/m2
125x240x10 0,85kg/m2 1,7kg/m2
150x300x10 0,7kg/m2 1,4kg/m2
250x250x14 0,8kg/m2 1,6kg/m2
300x300x14 0,5kg/m2 1,1kg/m2

Colours

White.

Packing and storing

MORFUN is packed in boxes; according to EC packing and storing directives for chemical products.

Hygiene and safety

See product label.

Specification

Aspect: Homogeneous white powder.
Apparent density (at 20ºC):0.86 +- 0,05g./cm³.
Performance:1 Kg. of powder : 0.8 lt. of mortar.
Water absorption:1.2 – 1.4 Kg./m².
The product complies with Standard:DIN 52671-E
Mixture water to achieve plastic consistence:240 cm³ approx. per 1 Kg.
6 Lt. approx. per bag of 25 Kg.
Maturing time:5minutes.
Registered in the health food Registration for manufacture and/or production and /or transformation of varnish paints and coverings, Health Registration Nº: 39.03631/GE

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.