Products

It’s a mortar of reaction resin by polyester for chemical anchorages.
HORFIX PACK POLYESTER, its two components product, presented in one only cartridge, of easy and fast application with conventional gun.
Properties
-Cured mortars of fast and great versatility.
-Tixotropyc mortars, allows its utilization in vertical or horizontal surfaces.
-High mechanical and chemical resistance without retraction or expansion.
-Great adherence on dry or humid surfaces as well as solid or empty surfaces.
-Easy system application with a tight dosage to increase the yield of the product and eliminate the looses.

· Uses
· Surface preparation
· Instructions for use
· Consumption
· Colours
· Packing and storing
· Hygiene and safety
· Specification

Last update: 22/07/2009

Uses

HORFIX PACK POLYESTER, can be used on porous surfaces, concrete, stone, masonry, wood, etc.
HORFIX PACK POLYESTER, its an anchorage system for rods, screws, steel roods, steel bars in constructions, iron armour, hooks, tubes, subjection of plaques system, etc.
Appropriate for peripheral fixations and as a join mortars for concrete pieces.

Surface preparation

Chose an adequate drill dimension, depending on the rod to anchor. (see table)
Eliminate the dust formed with a circular comb or air pressure blower.
If the anchorage is carry out on empty surface, introduce the adequate dimensional sieve (for bricks: sieve 15x85, and for concrete blocks : sieve 15x130).
The pieces to anchor must be clean, without any trace of grease or oxide.

Instructions for use

- Unscrew the top of the cartridge.
- Adjust the mixer mouthpiece to the exit hole of the two components.
- Put the cartridge in the gun, inserting first the head itself.
- Exert pressure on the gun, till it appears the two mixed components in homogenous grey colour.
- AVOID USING THE FIRST 10ml.
- In hallow surfaces, its necessarily to insert a sieve.
- Introduce the mouthpiece and inject the product till the bottom of the drill, filled till 2/3 parts of the drill.
- Introduce the element to anchor, with a slight rotation movement.
- Wait the harden time necessary before applying the load. ( see the drying time table).

Solid Surfaces
1- Clean the brush
2- Inject mortar
3- Introduce the rod with a rotation movement

Empty Surfaces:
1- Introduce the sieve
2- Inject the mortar
3- Introduce the rod with a rotation movement

Consumption

Colours

Comp A: Beige.
Comp B: Black.
Mixer A/B: Grey.

Packing and storing

HORFIX PACK POLYESTER, is presented in cartridges of 380ml.
Store it in a fresh and ventilated place, avoid direct sun or solar light.
Conservation between +5ºC and +30ºC.

Hygiene and safety

Polyester resins and its hardeners are irritant products to eyes and skin. The precautions of how to use the product are indicated in the cartridge label.

Specification

Nature: Unsaturated polyester
Mixed Colour: Grey (comp. A: Beige, comp. B: black)
Specific Weight: 1,7 kg/l at 20ºC
Cov: 23 g/l mixture of application.

Drying time
Temperature (ºC) Manipulation time
Drying Time
5 25 mint 180 mint
10 15 mint 150 mint
20 11 mint 60 mint
30 7 mint 30 mint.

ROD
M8 M10 M12 M16 M20
Rod diameter (mm)
8 10 12 16 20
Perforation diameter (mm)
10 12 14 20 25
Hole hallow (mm)
80 100 120 160 200
Minimum distance between
anchorage (m)
120 160 170 190 260
Minimum distance between
anchorage and edge (mm)
60 80 85 100 130
Work load (KN)
14 15 16 18 24

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.