EXPANPLUS SPECIAL TILES

Professional polyurethane foam


It is a fast hardener polyurethane monocomponent that reticulates in contact with humid environment giving place to solid foam.

Uses

Fillers, seals, fix and isolates from cold, hotness and sounds.
Can be use as an isolator protector of electrical conductions and water. Can be use for the hollow fillers between elements, fixations of tiles, etc.

Surface preparation

Adhere all types of surfaces, except polypropylene and polyethylene.

Instructions for use

Shake energetically the aerosol before applying.
It’s convenient to damp the surface to improve the adherence, reticulation and the inured of the foam EXPANPLUS.
The surfaces must be clean of dust and grease.
Twist the gun in the jar up side down and adjust the screw of dosage. Eliminate the remaining fresh foam and clean it with our EXPANPLUS L. cleansing.
Work temperature: of 10ºC to 30ºC.

Consumption

Expand 2-3 times its volume. Filled to a 40% of the volume of hallows. The lack of air and humidity may cause delayed on the expansion of the foam.

Colours

Yellow.

Packing and storing

In aerosols application by gun of 750ml, Perfect preservation in its original packaging for 12 months after its date of production, reflected at the bottom of the package.

Hygiene and safety

All the relevant indications and use for the packaging of aerosol products.

Specification

Base: Polyurethane, Stable foam with humid inured system.
Skin formation (20ºC and 65% H.R): 10 minutes
Dry time: Free of dust after 20-25 min. Inured 3h/5cm.
Foam Yield: 1000ml yield 30-40 litre of foam.
Contraction: None
Reticulation: 80% in closed cells
Specific weight: 21/25 kg/m3
Temperature resistant: from 40ºC to 100ºC
Foam characteristics: Thixotropic
Classification of fire reaction: B-2-B3 (DIN 4102 part 2)
Insulating factor: 0,032 kcal/ mh ºc (lambda)
Maximum tension: CA 15N/cm3
Permeability to vapour: 70g/m2 /24h. (DIN 53429)

Notes:

- La presente ficha técnica sirve, al igual que todas las demás recomendaciones e información técnica, únicamente para la descripción de las características del producto, forma de empleo y su aplicaciones. Los datos e informaciones reproducidas se basan en nuestros conocimientos técnicos obtenidos en bibliografia, en ensayos de laboratorio y en la práctica.
- Los datos sobre consumo y dosificación que figuran en esta ficha técnica se basan en nuestra propia experiencia, por lo que estos son susceptibles de variaciones debido a las diferentes condiciones de las obras. Los consumos y dosificaciones reales deberán determinarse en la obra mediante ensayos previos y son responsabilidad del cliente.
- Para un asesoramiento adicional, nuestro Departamento de Química Aplicada para la Construcción, está a su disposición.
- Otras aplicaciones del producto que no se ajusten a las indicadas, no serán de nuestra responsabilidad.
- Otorgamos garantía en caso de defectos en la calidad de fabricación de nuestros productos, quedando excluidas las reclamaciones adicionales, siendo de nuestra responsabilidad tan sólo la de reingresar el valor de la mercancía suministrada.
- Deben tenerse en cuenta las eventuales reservas correspondientes a patentes o derechos de terceros.
- La presente ficha técnica pierde su validez con la aplicación de una nueva edición.